badbyte.blogg.se - Brother printer test page

If the Scanner Setup dialog box appears, adjust the following settings as desired: Place the document you wish to scan in the Automatic Document Feeder or on the scanner glass depending on your model machine. If you would like to adjust the settings for the scan, place a check next to Display Scanner Dialog Box.Ĩ. Under Select a Profile you can choose from several pre-configured scanning profiles.ħ. Your scanner should now be listed under the scanner section of the scan panel.Ħ. The steps will differ slightly between each type of driver.ĥ. Depending on the model, there may be a TWAIN and a WIA driver available. From the list of available scanners choose a driver for your model. Under the scanner section click Select.Ĥ. The Scan panel should then appear on the left side of the screen.ģ. Click File => Scan Or Get Photo or click Scan Settings. Windows 8 or 8.1 Users: Click the PaperPort tile from the Start screen.Ģ.

Windows 7 and earlier: Click Start => (All) Programs => ScanSoft/Nuance PaperPort => PaperPort. The printer will automatically restart.The driver installation can be verified by attempting a test scan.

Release GO, all the LEDs will turn off.

Hold the button until all the LEDs light up and the Ready LED light turns off.

Hold the GO button while you turn the printer on.Press GO three (3) times within two (2) seconds.Turn the printer on and wait until it is in Ready mode.Press GO once more, and the printer will print a test page.Hold the button until the Toner, Drum and Error LEDs light up. Youtube Video: Change Toner Cartridge Brother HL-2135 - Print Test Page Youtube Video: Reset Drum Brother HL-2135W - Change Toner Cartridge Release the “GO” button and close the front cover. Simply open the front cover, and hold the “GO” button until all four LED’s are lit. This will turn off the drum warning light on the printer.

The Error LED should now be flashing, close the front cover.Īfter changing a DR2200 drum unit in a Brother HL-2135W, the printer’s page count needs to be reset.

The Toner, Drum, and Error LEDs will turn on.

When the Toner, Drum, and Error LEDs are on and the Ready LED is off, release the GO button.

Hold the Go button while turning the printer on.

If your Brother HL-2135W does not reset properly after putting in a new cartridge, and is still showing a 'toner low' or 'toner empty' message, it is possible to manually reset the printer: